Gunite vs. Shotcrete vs. Fiberglass Pools in North Texas: Which Is Right for Your Yard?

Short answer: Gunite and shotcrete are both concrete pools. The two words describe how the concrete is sprayed, not two different kinds of pool. Fiberglass is a different product: a one-piece shell made in a factory and set into the ground. In North Texas, concrete gives you any shape, size and depth, while fiberglass usually installs faster and has a smooth surface, but comes only in the shapes the manufacturer offers. On our expansive clay, either type depends on proper engineering and drainage.

What is the difference between gunite and shotcrete?

According to the American Shotcrete Association, shotcrete is the umbrella term for spraying concrete or mortar, and gunite refers specifically to the dry-mix process. So all gunite is shotcrete, but pool builders use the words differently: “gunite” usually means dry-mix, and “shotcrete” usually means wet-mix.

  • Gunite (dry-mix): A dry cement mixture is blown through a hose, and water is added at the nozzle. The nozzle operator controls the water, so the result depends heavily on that person’s skill.
  • Shotcrete (wet-mix): Concrete is mixed first, usually delivered by ready-mix truck, then pumped to the nozzle and sprayed with compressed air.

The practical differences are small for a homeowner. Wet-mix arrives already mixed and has to be placed in one continuous session, because it has a limited working window. Dry-mix can be stopped and restarted more easily, though it produces more rebound, the material that bounces off and can’t be reused. Either can make an excellent pool. The crew, the steel, the shell thickness and the curing matter more than the name on the contract.

How does fiberglass compare with concrete?

Factor Gunite or shotcrete (concrete) Fiberglass
Shape and size Any shape, size or depth Fixed factory shapes and sizes
Custom features Tanning ledges, beach entries, spillover spas and raised walls can all be built in Limited to what the mold includes
Surface Plaster, quartz or pebble finish Smooth gelcoat
Typical build time About 8–12 weeks of construction after permits About 3–5 weeks from excavation to startup, per one manufacturer
Long-term upkeep Interior finish needs resurfacing over time No plaster to resurface
Price Four Seasons custom pools start at $120,000 Often lower up front for a small, simple pool

Four Seasons custom pools start at $120,000. We build without shortcuts, so the pool lasts. Your final price depends on your yard, the features and how much decking and landscaping is included.

Which pool type holds up better on North Texas clay?

Neither type is immune to soil movement. Much of Collin and Dallas County sits on expansive clay, which swells when wet and shrinks when dry. That movement pushes on anything in the ground, including pool shells, decks, coping and plumbing.

A concrete pool handles this through engineering: steel, shell design and, where the site calls for it, piers. Fiberglass makers say their shells can flex slightly with soil movement, but a shell still depends on correct excavation, backfill and drainage.

The best protection on either type is the same: a soil report, an engineered design for your lot, and grading that moves water away from the pool and the house. Drainage is one reason we design the pool and the landscaping together.

When does each option make the most sense?

Concrete is usually the better fit if you want:

  • A shape or size built to your lot, including narrow or irregular yards
  • A spillover spa, tanning ledge, beach entry or sheer descents
  • A pool designed around a pergola, outdoor kitchen or covered patio
  • A deep end or a specific depth profile

Fiberglass can be a good fit if you want:

  • A simple pool that matches a shape the manufacturer already offers
  • A shorter time in construction
  • A yard with enough access to bring in a large one-piece shell

Access matters. A fiberglass shell arrives whole and has to be lifted into place, while a concrete pool is built on site through a hose. That can make concrete the more practical choice on tight lots in established parts of University Park, Highland Park and Preston Hollow, and on a narrow side yard anywhere.

What should you ask a pool builder about the shell?

  • Is the pool dry-mix or wet-mix, and who is on the nozzle?
  • Who engineers the shell, and is that design specific to my soil?
  • Do you recommend a soil report for my lot?
  • How thick is the shell, and what steel schedule is specified?
  • How is the shell cured after it is sprayed?
  • How will water drain away from the deck, the pool and the house?
  • What does the structural warranty cover, and for how long?

How does Four Seasons build pools?

Four Seasons Lawn + Landscaping builds custom pools with steel-reinforced shotcrete/gunite shells, and designs them together with the decking, outdoor living spaces, lighting, drainage and landscaping around them. Licensed and insured, we have been building outdoor spaces in North Texas since 2001. See our custom pool services or pool pages for Plano, Frisco and Dallas. Our office is in Murphy, close to Richardson, Allen, McKinney and Lucas.

Still planning? Read 7 things to decide before you build, or browse our FAQ.

Frequently asked questions

Is gunite the same as shotcrete?

Gunite is a type of shotcrete. Shotcrete is the general term for sprayed concrete, and gunite refers to the dry-mix process, where water is added at the nozzle. Pool builders usually use “shotcrete” to mean wet-mix concrete that is mixed before it is pumped.

Is gunite or shotcrete better for a pool?

Either can make an excellent pool. The skill of the crew, the steel, the shell thickness and the curing matter more than the process. Wet-mix has to be placed in one continuous session, while dry-mix can be stopped and restarted more easily.

Is fiberglass or gunite cheaper in Dallas–Fort Worth?

Fiberglass often costs less up front for a small, simple pool. A custom concrete pool costs more because it is built to your yard. Four Seasons custom pools start at $120,000.

Can you put a fiberglass pool in North Texas clay soil?

Yes, but it needs correct excavation, backfill and drainage. Expansive clay swells when wet and shrinks when dry, so any pool in North Texas should be designed for the soil on that lot.

How long does each type of pool take to build?

Published DFW guidance puts a concrete pool at about 8 to 12 weeks of construction once permits are approved. One fiberglass manufacturer cites 3 to 5 weeks from excavation to startup. Design, permits and HOA approval add time for either type.

How often does a concrete pool need resurfacing?

One fiberglass manufacturer’s Texas guide cites resurfacing every 10 to 15 years at about $10,000 to $15,000. The real interval depends on the finish, water chemistry and care.

Talk through the options for your yard

The right pool depends on your lot, your soil and how you want to use the yard. A designer can walk your property and show you what fits. Call (214) 504-4250 or request a design consultation. Financing is available for qualified homeowners.

Leave a comment